is a 0.96 inch White OLED display module. The display module can be interfaced
with any microcontroller using IIC protocols. It is having a resolution of
128x64. OLED is a self light-emitting technology composed of a thin,
multi-layered organic film placed between an anode and c..
This product is a 1-channel relay module
board with LED indicators; it can be controlled by microcontrollers such as
Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.Specifications·
voltage: 12V·  ..
It is a 1-channel relay interface board with photoelectric isolation, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.Specifications· Rated voltage: 5V· Rated current..
volts A 1-Channel relay module is an interface board that is compatible with
Arduino, AVR, PIC, ARM, and other microcontrollers. This module can operate at
high currents such as AC250V 10A or DC30V 10A. It uses digital outputs from
controllers and processors to control larger loads and devic..
10K Potentiometer Module is an adjustable potentiometer that may be used to
create a variety of unique user interfaces. A potentiometer is pre-mounted on a
PCB board, and three output berg connector pins are accessible for quick module
connections and disconnections.Specifications· &nbs..
board is made in Arduino shield form and can be used with Arduino Uno or Mega.
Each LED can be controlled individually connected to digital pins D2-D13 of
Arduino. Circuit requires 3.3-5V supply, it can work with lower supply by
changing current resistor across LEDs. Specifications· &n..
switching mode power supply for the isolation industrial-grade built-in power
supply module, with temperature protection, over current protection and short
circuit full protection, AC110 ~ 240V wide voltage input, high and low voltage
isolation, DC12V/1000mA and DC5V/500mA dual isolated out..
is a general purpose chassis mounting mains transformer. The
transformer has 240V primary windings and center tapped secondary
winding. The transformer has flying colored insulated connecting leads
(Approx 100 mm long). The Transformer act as a step-down transformer
reducing AC - 240V..
This 16X2 LCD Display Module is used to interface with any kind of microcontroller target boards like 8051, AVR, Arduino and any other processors. The module comes with 4-bit data and 3-bit control pins. The LCD Contrast can be varied with the potentiometer provided on board.Specifications..
module is made up of ICR 18650 3000mAh Lithium-Ion Batteries of the highest
quality with a BMS circuit. In comparison to Ni-Cd, Ni-MH, and lead-acid
batteries, it is compact and light. The battery pack may be directly charged
with the DC power adapter thanks to the inbuilt charge pr..
has 4 buttons, and since every key has its own wire line, no matrix code is
required - just treat these like every day switches.Specifications·
with 8 bit Microcontrollers·