SENSORS
Model: EE555-O1
The MF58 is an NTC thermistor which is manufactured using a combination of ceramic and semiconductor techniques. It is equipped with tinned axial leads and then wrapped with purified glass.Specifications· Resistance: 100K ohm (Rated resistance at 25 degrees C)·&nb..
₹18.00
Ex Tax:₹15.25
Model: EE575
The
MLX90614 ESF is an infrared thermometer that may be used to take non-contact
temperature readings. The signal conditioning ASIC and the IR-sensitive
thermopile detector chip are both housed in the same TO-39 container. The
Integrated MLX90614 GY-906 is a low-noise amplifier, 17-bit ADC, and ..
₹1,178.82
Ex Tax:₹999.00
Model: EE535-AC1R6
The MPU-6050
is a serious little piece of motion processing tech! By combining a MEMS 3-axis
gyroscope and a 3-axis accelerometer on the same silicon die together with an on board Digital Motion Processor™ (DMP™) capable of processing complex 9-axis
Motion Fusion algorithms, the MPU-6050 doe..
₹295.00
Ex Tax:₹250.00
Brand: Eagle Electronics
Model: EE583
The
MQ-135 Gas Sensor can identify dangerous gases and smoke, including ammonia
(NH3), sulfur (S), benzene (C6H6), and CO2. This sensor, like the others in the
MQ series of gas sensors, has a pin for both digital and analog output. The
digital pin turns high when the amount of these gases in the..
₹129.80
Ex Tax:₹110.00
Brand: Eagle Electronics
Model: EE556W- AC9R2
This
NTC Thermistor 10K 1% 3950 waterproof probe module has an NTC temperature
sensor which gives the analog output that allows you to easily add
over-temperature and under-temperature condition sensing capabilities to your
project. Specifications·
Type:..
₹198.00
Ex Tax:₹167.80
Brand: Eagle Electronics
Model: EE529T-AC9R1
Thermistor
Sensor Module is used to sense temperature and convert it into output signals.
It is associated with both analog output pin and digital output pin labelled as
AO and DO respectively on the board. Thermistor Sensor Module is made of
semiconductor materials. Basically, thermistor sensor..
₹95.00
Ex Tax:₹80.51
Brand: Eagle Electronics
Model: EE556-AC9R4
This NTC thermistor module has an NTC temperature sensor which gives the analog output that allows you to easily add over-temperature and under-temperature condition sensing capabilities to your project. Specifications· Operating Voltage: 3.3V to 5V DC· ..
₹70.00
Ex Tax:₹59.32
Model: EE546- AC9R3
Specifications·
Stainless
steel sheath and waterproof·
Measurement
range: -20 to 105 °C·
Output: 2 wires·
Type: NTC
10k±1% 39..
₹155.00
Ex Tax:₹131.36
Brand: Eagle Electronics
Model: EE571-AC4R5
The
Obstacle Sensor detects objects and obstacles in front of the sensor. The
sensor continues to transmit infrared light, and when an object approaches, the
sensor detects it by monitoring the reflected light from the object. Daylight
has no effect on this sensor. It can be used in robots for o..
₹119.99
Ex Tax:₹101.69
Model: EE532-AC8R2
Specifications·
Resonance
Frequency: 4.6 Khz +/- 0.5 Khz·
Resonance
Impedance: 200 Ohms·
Capacitance:
20nF +/- 30% at 1 Khz·
..
₹9.99
Ex Tax:₹8.47
Brand: Eagle Electronics
Model: EE513-AC12R2
Pulse rates are measured via
this module. The most important is that it be worn on a finger or on the
earlobe. The XD-58C pulse sensor is commonly used to assess heart rate in
medical equipment. Pulse Sensor Amped improves the hardware by including amplification
and noise cancellation electronic..
₹348.10
Ex Tax:₹295.00
Brand: Eagle Electronics
Model: EE551-AC5R1
The Raindrop Detection Sensor module is an easy-to-use and low-cost drop recognition sensor. The sensor works through a series of exposed parallel traces on board which produces electrical variations when drops or water volume changes. By using microcontrollers or ADC ICs (Arduino and PIC) it's fair..
₹145.00
Ex Tax:₹122.88